If the cartridge is refilled and stitched If you refilled a cartridge in a service center, then it should have been flashed there and you should have been notified about it. If these options do not work for you, try looking for ways to flash the chip on the network. Press the Power button again, wait until the printer turns off.Press the "Power on" button (the indicator will blink 1 time).When the indicator stops flashing, press “Continue” 4 times (the indicator color will change again).
As soon as a message about the lack of ink appears on the monitor, click "OK".How to reset the copy counter on Canon printers or cartridges: Then, if you refilled the cartridge yourself, you need to try resetting the chip or zeroing it. It would be nice to reconnect them (connect to another USB port computer). You can try or contact a specialist at the service center. Upon reaching a certain limit, the chip blocks printing. Almost all modern cartridges are chip-based, which leads to counting of printouts. Then make sure the cover is closed and all protective films have been removed. Make sure nothing gets between the contacts on the printer and the cartridge. Incorrect installation cartridge after refilling or the lack of appropriate drivers for the printer on the computer. After 5 minutes, remove and wipe away any streaks.Ģ. To rinse or place it in warm distilled water or alcohol so that the nozzle is completely immersed in the liquid. Simple, causes the ink to fill the nozzle to dry. Let's look at some of the common causes of failure to print with full cartridges:ġ. Not always, in such cases, you should put an end to the old cartridge. So, you refilled the old cartridge with ink, installed it, but the printing "does not go". Therefore, it is not uncommon for the practice of refilling a cartridge to save money, because in this case only the cost of ink or toner needs to be paid. The cost of the cartridges is high and sometimes comparable to the price of the printer itself.
0 kommentar(er)
